Javascript required
Skip to content Skip to sidebar Skip to footer
Home / Corel Draw X8 Fill a Box Made of Lines

Corel Draw X8 Fill a Box Made of Lines

In CorelDRAW, a variety of shaping tools tin can help you easily create visually highly-seasoned designs for logos, clip art, and more than. These powerful tools can be used to build simple or complex shapes that will give you practically limitless creative abilities! This tutorial volition go over the basics of the CorelDRAW shaping tools, step-by-footstep, and so guide you lot through creating even more than advanced designs.

Thanks for watching! Nosotros promise you lot plant this tutorial helpful and we would honey to hear your feedback in the Comments section at the bottom of the page. You volition observe a written version of this tutorial below, and a printable PDF re-create and practise file to download on the Download Resource tab above.

Acquire how to apply CorelDRAW's shaping tools to transform objects, by welding or combining objects, using one object to trim some other object, and more.

Come across what'southward new in CorelDRAW Graphics Suite!

Download your FREE 15-twenty-four hour period trial for Windows or Mac and fuel your creative fire with the new perspective tools, flexible blueprint infinite, progressive photograph editing tools, and much more.

Download these free resources:

Written tutorial for Windows (PDF, 876 KB)
Written tutorial for Mac (PDF, 794 KB)
Exercise file (Null file, 681 KB)

CorelDRAW Graphics Suite Resource
Quick Starting time Guide (PDF, 2 MB)
Keyboard Shortcuts (PDF, three.5 MB)
CorelDRAW User Guide (PDF, 28 MB)
PHOTO-Pigment User Guide (PDF, 26 MB)

What's New in CorelDRAW Graphics Suite

CorelDRAW Tools

This tutorial will first show you the basics of the shaping tools in CorelDRAW. Nosotros will then use the tools to create a more than avant-garde blueprint. The shaping tools that will be used in this tutorial are:

  • Weld
  • Trim
  • Intersect
  • Forepart minus dorsum
  • Back minus front end
  • Simplify
  • Boundary
  • Combine
  • Intermission autonomously

Click on any of the images below to view full-size.

At that place are three ways to admission shaping tools in the CorelDRAW interface:

  1. Get toWindow>Dockers>Shaping to open the Shaping docker.
  2. Select multiple shapes in your design to activate shaping tools inside an interactive toolbar.
  3. Get toObject>Shaping (or depending on the CorelDRAW version, maybeArrange).

TheWeld tool takes two shapes and combines them into one.Information technology does this by giving the concluding shape that's created the same backdrop of the selected target shape, once they've been welded together.

Here, we go over how to create a yellow cat with theWeldtool:

  • Select the pink ear with thePick tool
  • Hold down theShift key and select the yellow circle
  • Click on theWeld tool in the interactive toolbar
  • Repeat this process with the other ear to plough them both xanthous

Welding Using the Shaping Docker

You can besides utilise the Shaping docker to weld shapes. After opening the Shaping docker, make certain to selectWeldfrom the drop-downward menu. The Shaping docker has 2 options available when welding. You tin can cull to leave the original source object, which is the first object yous selected, or you can choose to go out the original target object, in case you need to further build your artwork.

Allow's take a wait at how you lot can use theWeldtool in the Shaping docker to create a logo:

For this instance, brand certain to choose the "Leave original source object" pick.

  • Use thePick tool to select the R
  • Click theWeld to button in the Shaping docker
  • Click the C (our target object)
  • Pull the welded letters away to see the original R left behind

The key to using theTrim tool is to determine which object needs trimmed, and which object you are going to use to trim it. In this example, we are going to create a unproblematic crescent moon from two circles, using the pink circle to trim the greyness circumvolve:

  • Select the pink circle with thePick tool
  • Hold down theShift cardinal
  • Select the gray circle
  • ClickTrim in the interactive toolbar
  • Pull the pinkish shape away to reveal the grey crescent moon

TheIntersect tool helps you lot create a shape using overlapping shapes. In this get-go example, we are going to create one-half stars on the edge of a flag blueprint:

  • Select the blueish shape
  • Concur downwardly theShift key
  • Select the top star
  • Click theIntersect push button in the interactive toolbar
  • Click white on your color palette while the new intersected piece is selected
  • Delete the original pink star
  • Echo the same procedure with the 2d star

In this 2nd example, we are going to put teeth within the mouth of our "smiley guy" design:

  • Select the teeth
  • Hold down theShift key
  • Select the red mouth
  • Click theIntersect button in the interactive toolbar
  • Delete the original teeth
  • Select the new teeth
  • Click white on your color palette while the new teeth are selected

TheFront minus dorsum tool erases shapes that are in the back of a design and leaves those are at the forepart. With this tool, it's not critical which shape is selected get-go.

In this instance, we're going to remove the blue rectangles, while leaving the blood-red triangle intact:

  • Select the triangle
  • Hold down theShift key
  • Select the blue rectangles
  • Click theFront minus back button in the interactive toolbar

TheBack minus front tool works in the opposite mode, by subtracting the dorsum shape from the front shape in designs, creating a unlike effect.

In this example, nosotros're going to make a quick logo using this tool:

  • Select the Yard
  • Hold down theShift key
  • Select the blackness circumvolve
  • Click theBack minus frontbutton in the interactive toolbar

TheSimplify tool trims overlapping areas among objects, no matter the gild in which the objects are selected. At first, it looks similar zilch has happened, but if you lot pull the objects away from one some other, y'all will see each layer beneath is trimmed past the objects to a higher place or below it, like a cookie cutter.

In this case, we are going to remove the cerise rectangle from a blueprint for a more uniform, simplified result:

  • Lasso all the objects on top of the blue background
  • Click theSimplify button in the interactive toolbar
  • Delete the ruby-red rectangle to meet the blue background
  • Go toView>Wireframe to meet the bare bone results
  • Go toView>Enhanced to return to your normal view

How to Combine Shapes

TheCombine tool is a great way to modify existing artwork to recolor or manipulate it to await differently. In this example, we are going to use theCombine tool to get a pure silhouette in a deer design, so it tin exist placed on top of other pieces of art:

  • Select one of the white shapes
  • Hold down theShift fundamental
  • Select the image of the deer
  • Click theCombine button
  • Repeat this process for each white shape

How to Break Apart Shapes

The opposite of theCombine tool is thePause apart tool, which allows you to make multiple parts out of a single object. For this example, nosotros're going to suspension this shape autonomously, so we can color the stars white:

  • Select the shape
  • Click theSuspension apart button in the toolbar

It will look every bit if the stars have disappeared, but they are all the same there! They're simply now the same blueish equally the groundwork.

Let'southward find the stars usingWireframe view and cease coloring them white:

  • Go toView>Wireframe
  • Lasso the all the stars, making sure to avoid lassoing the rectangle
  • Now click white on your colour palette
  • Go toView>Enhanced to return to normal view
  • Go toObject>Order>To Front of Page to bring the stars forward into view

Now that you've learned the basics of using the shaping tools in CorelDRAW, let's put them to work by creating a fun design! In this example, we are going to use the shaping tools to create a castle:

  • Select the left side of the castle
  • Click theWeld tool to combine the top and bottom together
  • Choose black in your color palette
  • Select all 4 pinkish squares
  • Click theTrim push button
  • Deleted the four pink squares
  • Select the left side of the castle
  • Indistinguishable information technology by pressingCtrl + D on your keyboard
  • Concord downwards theCtrl key and drag the duplicate to the correct side of the castle
  • Select the left side and all other black parts of the castle
  • Click theWeld button in the toolbar
  • Select the pinkish and grey circle in the upper correct corner
  • Concord downward theShift central
  • Click theSimplify button
  • Delete the pink circumvolve, leaving a greyness crescent moon
  • Agree downwardly theShift central
  • Select all the pieces of the bell
  • Click theWeld button in the toolbar
  • Select all the squares in the window on the correct side
  • Click theCombine button in the toolbar
  • PressCtrl + D to duplicate the combined window
  • Drag information technology underneath the other windows
  • Select the upper left window and choose xanthous in your color palette
  • Select the other windows and choose white in your colour palette
  • Select the bars in the gate
  • Select the other part of the gate
  • ClickBack minus front in the toolbar
  • Choose white in your color palette
  • Lasso the whole castle
  • PrintingCtrl + Thousandto group it
  • Get toObject>Sharing>Boundary
  • Choose white in the color palette to change the outline color
  • Go to theOutline tool
  • Choose a width of .25"
  • Gear upBackside make full andCalibration with object
  • ClickOK
  • Get toObject>Order>Dorsum One

Congratulations! You've completed your castle and learned how to make good use of the shaping tools in CorelDRAW.

Run into what's new in CorelDRAW Graphics Suite!

Download your FREE 15-day trial for Windows or Mac and fuel your creative fire with the new perspective tools, flexible design infinite, progressive photo editing tools, and much more.

stockdillvailes.blogspot.com

Source: https://learn.corel.com/tutorials/coreldraw-shaping-tools/